SG-CB-2000X-100-JD - Genius - 7 Pin Controller For Bobcat® Loaders - John Deere 3 Pin | Skid Steer Genius
This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 2 x 12 volt solenoids directly from the left and right paddle controls of your Bobcat®. Works on Bobcat® skid steer loaders as well as Toolcat® and Versahandler® machines. Additionally this comes with a 3 Pin plug to mate to John Deere Attachments. Now you can plug your John Deere Broom directly into your Bobcat® and it will work perfectly from the button controls of your Bobcat®. It's Genius!
What is amazing about this is that we have taken our engineering to another level. This controller features a unique latching circuit so that you do not have to hold your thumb down for 8 hours for continuous operation.
It works like this: Plug in our controller and your switching paddles will be transformed. On your left paddle, touch the bottom part of the paddle and it works in a momentary fashion. Touch the top and it latches. Touch either the top or bottom and it releases. The same goes for the right paddle. Amazing, right? This was all done because of feedback from customers like you. Now you can run accessories like sprayers, lighting and accumulators without holding your thumb down for hour after hour while trying to run your machine. Genius, pure Genius!!!
Takes about 1 minutes to install. Is 100% plug and play. This configuration is a plug mount so you can use it over and over on any attachment that has one or two solenoids to control. This is complete and ready for plug and play directly into any Bobcat® branded machine. It has an indicator LED to show you that you have power and that it is receiving commands from the Bobcat® machine as well as when the paddles are operating correctly.
What is included:
- CanBus Controller with 2 outputs via a 4 pin Deutsch DT06 receptacle. Up for latching or down momentarily control from your left stick for port A. Up for latching or down momentarily control from your right stick for port B.
- John Deere 3 Pin Adaptor. SG-DT04-JD03
- 1 x 4 Pin DT06 Deutsch connector with an 18" pigtail to connect to your attachment solenoids from the controller.
- Easy to Follow Instructions
- Incredible factory support that is not available anywhere but from Genius.
Read more about how this product functions here.
This is not just a plug in adapter. There is a microprocessor with software loaded along with a IC driver circuit that enables this to work. That is why it costs more than just a plain old connector.
This is not a Bobcat® product. This product is not endorsed by Bobcat®. We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls. It is perfectly safe to use and will not damage a thing. If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us. Skid Steer Genius is a specialty controls company. Our goal is to make anything you buy for your machine work on any machine. Others design and build in such a way as to stop you from doing this.
Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.
All rights reserved.
We Also Recommend
SG-CB-2000X-100 - 100 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-1000-100 - 100 Pack, 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius
SG-CB-2000X-100 - 50 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-4014A - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius
QUESTIONS & ANSWERSAsk a Question
Customer bought a JCB 3TS (7 pin) and needs to run Deere worksite pro MH60C head (3-pin) Is there an adapter for this?
JCB uses 14 pin with the ground pin in B instead of JD in A. Sent a photo please so I can see what you see.
I have a customer with a Deere CP24D cold planer and wants to run it on a Bobcat 2014 T750. Need to confirm the electrical jumper
Swap the couplers. Move pin A in the attachment to Pin B. Buy this controller if your machine has pilot controls.
I have a 2012 Bobcat T750 (7 pin) and want to run a John Deere Worksite Pro DB84 dozer blade (3 pin). I think I need something like this, but the pin configuration on the machine looks different. Can you point me in the right direction? Thanks.
No. This should be correct.
Will this operate a grouser 6way dozer blade with john deere 3 pin .. And will it operate a harley rake with john deere 3 pin. I have a 2017 t590 with 7pin but the attachments are john Deere 3 pin
Yes. It will work perfectly for those applications. Thanks for asking.
I am looking for 7 pin Bobcat to three wire leads, one ground, two hot for back and forth solenoid control.
This is the correct controller.
S650 BOBCAT TO BA84 BROOM JOHN DEERE IT SOUND LIKE IT WORK. IF NOT IS IT RETURNABLE TO YOU.
Yes this will work.