SG-CB-6000-FFC-KIT - Genius - 7 Pin Controller For Bobcat® to FFC Cold Planer
Bobcat® Compatible 7 Pin Input - FFC - 6 Port
This allows you to plug into any Bobcat 7 pin and translate the signals to a switched output which is pin for pin compatible with any FFC cold planer or any other attachment produced by FFC. Just unplug your control box and plug ours in. Our output connectors are on magnets so you can add them temporarily and remove them easily when your project is done.
This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 6 x 12 volt solenoids directly from the stick controls of your Bobcat®. Works only on Bobcat® skid steer loaders with pilot controls. Does not work on hand/foot control, Toolcat and Versahandler machines.
Takes about 30 seconds to install. Is 100% plug and play. Throw away the crappy plastic control box that the manufacturers supply and switch over to true machine controls.
What is included:
- 7 Pin Cable - 2 Feet Long - PN# SG-CBC-24
- CanBus Controller with 4 outputs. Up/Down & Left/Right. PN# SG-CB-6000
- FFC Adapter Harness Pin Output Cable kit. PN# SG-BC14-FFC
- Easy to Follow Instructions
Read more about how this product functions here.
NOTE: We have an other harnesses available for many types of attachments from multiple manufacturers.
This is not a Bobcat® product. This product is not endorsed by Bobcat®. We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls. It is perfectly safe to use and will not damage a thing. If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us. Skid Steer Genius is a specialty controls company. Our goal is to make anything you buy for your machine work on any machine. Others design and build in such a way as to stop you from doing this.
Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.
All rights reserved.
We Also Recommend
SG-CB-2000X-100 - 100 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-1000-100 - 100 Pack, 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius
SG-CB-2000X-100 - 50 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-4014 - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius
QUESTIONS & ANSWERSAsk a Question
You Tube video #105 has the SG-CB-6000 Skid Steer Genius control, do you also sell the Paladin Harness #114874, that is shown in the video?
No we do not sell the Paladin harnesses.
We are thinking of purchasing a Bradco HP600 and want to know if a pin adapter is available for a Cat 246 skidsteer.
If it is a A,B or C series, you do not have enough controls. We have several ways of adding controls starting at $200 all the way up to $1300. Just need a price point so I can make suggestions.
I just bought this controller for my Bobcat T770 to run a Halverson 140 wood processor as recommended by them . Will this work or should I be running https://www.skidsteergenius.com/collections/7-pin-controllers/products/genius-7-pin-controller-for-bobcat-14-pin?
Yes. This is the correct controller.
What you bought was for FFC attachments. You do not own an FFC attachment.
Just bought a Bobcat T550, with Joystick controls, Have a Halverson 120 wood firewood processor, they sent a adapter for there connection to a 14 pin oonnector, my bobcat has 7 pin, Help
Here is the controller you should use but email me back and I will sned you the proper wiring schem to use because they send out the wrong instructions on how to wire that connector. You should also buy our 14 pin female connector because they use the wrong one with no strain releif.
Im not sure witch harness I need to connect a 7 pin male connection on my bobcat stump grinder model #sg60 ser#233003398 to my 14 pin male connector on my cat 279D can you let me know what I will need and how to connect it Thanks Jeff
Here you go.
We have a customer with a Bradco cold planer that has a 6 pin connector? Is Bradco the same as FFC? Additionally, if not do you make a 7 pin Bobcat to 6 pin Bradco converter?
Yes Bradco and FFC are the same thing. If it is a new attachment, you need an adapter to 14 pin. It can be found here. https://www.skidsteergenius.com/collections/adapters/products/sg-bc14-ffc-bobcat-14-pin-to-ffc-inline-plug
If your Bobcat is a newer model with pilot controls, then you need this control box. https://www.skidsteergenius.com/collections/7-pin-controllers/products/genius-7-pin-controller-for-bobcat-14-pin
Here is the unit in operation.
What is the timeline/availability of this part: SG-CB-6000-FFC-KIT - Genius - 7 Pin Controller For Bobcat® to FFC Cold Planer?
Hello. We just bought a Takeuchi and would like to run our Bobcat attachments. Is there a 14 to 7 pin controller to fit it? Thanks.
Sorry but at this time there is not. Bobcat attachments have a Bobcat computer in them. Here are the details.
Here is our guide to selecting harnesses for Bobcat attachments.