Super Controller 14 Pin 10 Controls - Permanent Install | Skid Steer Genius
Genius Super Controller 10 Output Permanent Install Kit: It is now possible to operate any attachment on any machine.
We are proud to announce that our new Super Controllers are now in production.
What is a Super Controller? It is pure Genius. We have put our 20 years of product and machine experience along with 30 years of electronic know how to work to solve one of the industries biggest issues. Why won't machine manufacturers allow me to operate all of my attachments on any machine and why aren't there enough controls to do what I want to do?
These issues are now completely a thing of the past thanks to pure Genius! There are two options available so please read the descriptions below and make sure you are choosing the correct product for your needs.
PLEASE READ THIS CAREFULLY: This is a permanent kit that has a 23 foot cable meant to connect under the cab and follow the hydraulic lines out to the boom and then connect to your attachments via a 14 Pin connector. The other kit we make is our rental kit meant to be installed in the cab and then passed through the doorway. Please order the rental kit if this kit does not suit your purpose.
Series 10 SG-SC-202 (Universal Install kit fits all machines) - Permanent Kit - 10 output, 23 Foot Output Cable -
What's included. This is meant to be a permanent install kit that will stay in your machine. We developed this controller particularly because the Kubota controls were so poor. Skip the Kubota control and become a Genius. This kit includes 4 mounting schemes so it will work on any machine. Since introducing this for Kubota mahines, we have come up with several parts that make this a truly universal kit.
- Bolt on - 2 small joysticks similar to a video game controller that clamp onto any control stick. This gives you 10 controls. 4 more than most machine manufacturers give you today.
- Each joystick has an X/Y 4-way control plus a Z locking button. This allows you to run equipment requiring an always on control.
- A controller interface in a sealed box with mounting magnets so you can easily install it with no labor.
- A 23 foot harness that you will hard wire inside your machine and run out to your boom.
- On the end of the harness is a 14 pin connector pinned out the old fashioned way. The way things used to reliably work. Once installed, you will bolt it to your boom end and add the dust cap for an OEM complete system.
- The connector is on magnets, can be drilled and tapped to your boom or includes 2 of the most common mounting tabs to bolt to your existing hydraulic blocks so you can permanently install it on any machine.
- A 2 pin Deutsch 25 Amp plug so you can instantly plug into power the controller. You can be up and running any attachment in just a few minutes.
Why did we develop this product? We hate the way all of the manufacturers have conspired to make the attachment controls individual to each machine in an attempt to make you have to re-purchase them should you decide to change brands. In the past, owners did not care about this because you did not have much money tied up in attachments or if you did, they did not have many controls. As the modern machines evolved, it would have been easy for all of them to design similar controls or at least pin out the 14 pin connectors the same so that if you had several machines, you could swap the attachments back and forth. Instead, each manufacturer did things like pin the exact connector differently so even though they were the same, they would not work. Others used a different version with 8 pins so they would not interface properly. Still another manufacturer added a computer interface and another different 7 pin connector which was virtually impossible to interface to until we started work in 2010 and built the first after market controller that would work easily with their machines.
That product termed the CanBus controller was so successful that we moved onto the other manufacturers and created what you see here. We realized early on that we could not add buttons to their sticks as it is mechanically impossible. What we decided to do was to create a small joystick control that could easily be added and be as unobtrusive as possible. My personal feeling is that when I operate something, a joystick is much easier than reaching for buttons. People raised over the past 40 years have come in contact with video game controllers and so they should be familiar with this. We are going to be using these on our boom mowers and a joystick will be a much more efficient way to control our mowers because we can actuate both the X & Y axis at the same time. We are really looking forward to getting these out into the field for you to try and welcome your feedback.
If you need to learn more, watch our videos here.
We designed this from the ground up and made the control pack to operate inside your cab easily and reliably. Every part of this was designed by us and we even wrote the software contained in the controller pack. This shows our true dedication to building you something that is truly Genius and not some generic thing that you have to customize.
Bobcat Grader Upgrade:
Do you have a Bobcat Grader 96" or 108". You will need the following additional harnesses and adapters to make this work. Once installed, all functions including side shift will work.
Bobcat T-Harness - 7164095
Bobcat Grader Adapter - SG-BC14-BC14-GR
We welcome your comments and questions.
Installation Instructions Can be Found Here:
Kubota Permanent Install:
Bobcat Permanent Install:
Cat 299D Permanent Install:
We Also Recommend
SG-CB-2000X-100 - 100 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-1000-100 - 100 Pack, 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius
SG-CB-2000X-100 - 50 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-4014 - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius
QUESTIONS & ANSWERSAsk a Question
Hi folks, I have a CAT 289c2 Skidsteer with an 8 pin deutch attachment connector. I have just recently purchased a melroe branded bobcat grader. The info plate on the grader simply shows a model: GRADER and SERIAL: 802700298 it has 6 solenoids and appears to have been connected to a controller brain box that has bobcat p/n 6678675 and shows made in CANADA. Is there a way to use this grader with my existing aux controls on my machine? Im perfectly capable of wiring, testing etc, soldering and adding relays if nesscessary.
It is next to impossible to use on your machine without modifying your machine controls.
Have a bobcat 108 grader set up on 299xhp cat with your controller to work with works great Need kit to install on a second 299xhp is the 10sg-SC-202 the one needed or another don’t need any thing for grader only have one Need to be able to use on ether
Correct. You will only need to buy the Super Controller kit for each additional machine that you wish to operate the grader on. The T-Harness and Side Shift harness will stay with the grader.