Cart 0

14 Pin Bobcat Planer/Wheel Saw & SG-60 Harness | SG-BPH-14-7-9DP - | Skid Steer Genius

  • $295.00

Ask a Question

14 Pin to Bobcat Planer, Wheel Saw & SG-60 Stump Grinders Only.

Connect from your Case, Gehl, Kubota*, JCB/Volvo, Mustang, Takeuchi, New Holland, John Deere, Yanmar, Cat after 2014) to your Bobcat® Planer Only.
NEW for 2016:  Bobcat is now using 2 styles of connectors on their attachments.  You have to check the solenoids and refer to the photos to identify which style you require.  If you need Deutsch, it is the newer style and does not need to be a 7 output. Delphi or Deutsch style. 

This is a custom harness that we designed to defeat the Bobcat method of planer operation and allow you to run it on any machine equipped with a 14 pin connector.  Other manufacturers use a priority valve system that bleeds oil off to run the secondary functions.  Bobcat does not do it this way.  They require an additional function to bleed to the secondary function.  Because of this, we were scratching our heads trying to figure out what to do.  Well, we got it and now so do you. 

We started as attachment manufacturers and felt that the 7 pin option was only designed to block users from running their attachments on anything but Bobcat® brands.  There are so many hostile customers out there that we felt that we could help, so here is the deal. We built one of these to see if it would work. Our customer was more than happy to help out with feedback of how he used the harness. We posted this to our database so we could help the next guy. He posted the results to an online forum and then our phones starting ringing off the hook. So we now operate Skid Steer Genius as an example of how to actually help people and not hinder them.

To keep the kit easily adaptable to the most attachments possible and all of the different machine types, we have made this available as a kit. The 2 pin connectors are installed, but the 14 pin is not. We ship this kit with a diagram and installation instructions so that you can pin it for your specific application. All of the pins are professionally crimped.

NOTE:  This adapter works with all 14 pin installations but in some cases needs to be re-pinned (John Deere).  The other issue is controls in your cab.  Your machine must have 6 control buttons pinned out to your 14 pin to be able to have all functions of the planer.  If not, you will have to forego sideshift.  We supply wiring only, but if your machine is not capable, there is nothing we can do about it. 

NOTE:  For 2019 this item ships with Delphi connectors.  If you have Deutsch, you must add adapters as needed.  This could be up to seven but you must check.  Why are we doing it this way?  Because most units have Delphi.  Only a few have Deutsch and the ones that do often have a mixture of connectors so no matter what we did, we never could ship the correct harness.  This method puts the onus on you to make sure that you have all of the same connectors and which ones you have.  If you order incorrectly, we no longer have to exchange harnesses which is very costly.  All we do is ship you how ever many adapters that you need.

How Does it Work?
Bobcat® branded attachments that have a 7 pin harness installed have a computer installed on the attachments. We run our harnesses directly to the solenoids on the attachments from your skid steer loader. Bobcat® installs a computer right in the middle of the action. In most cases it is total overkill and not needed. They have only a few attachments that have a lot of functions that need more than the usual 8 or 14 pin outputs on every other brand in the market. In our opinion, it has more to to with marketing. They are under the mistaken thought that you will only ever buy Bobcat branded attachments. Instead, it just costs you a lot of money changing them back to the way that every other manufacturer does it.

Our harness bypasses their computer and plugs directly into the solenoids and brings the attachment back to modern reality. The other end plugs into your 14 pin harness on your machine. The only issue we have seen is if your machine is not wired for enough outputs to run that particular attachment. Example. Kubota SVL75 & SVL90 loaders only have two outputs. This will work OK on items like brooms, but not much more. Not sure why they did not think ahead an allow for more outputs, but that is just the reality. As of June 2014 Kubota added an add on button controller to allow more controls.  Check out the Genius Super Controllers for an easier installation at 1/2 of the cost.

Bobcat® Cold Planers, Wheel Saw and Stump Grinder (SG-60):  These attachments have 7 solenoids.  6 are for control and one diverts the flow from the drum to the controls.  Most skid steer loaders have 6 switches for control so they do not have enough to operate the Cold Planer.  The only machines that we know of are the Kubota SVL's with the enhanced controller. This controller has a 7th locking function that allows you to operate the cold planer properly.  Different years use this solenoid differently.  Start out with the green wire plugged into this solenoid first and if the wheel stops spinning when you try to operate the controls, try removing the wire.

Now the disclaimer. The "Bobcat®" trademark and logo are registered trademarks of Bobcat® Company. 
This is not a Bobcat® product. We are not affiliated with Bobcat. We have not copied anything from Bobcat. We are not in any way trying to make you think you are buying a product from Bobcat® nor are we trying to make you think you buying a product endorsed by them. We expect them to tell you the same thing. After over 20 years of designing, manufacturing and selling some pretty incredible skid steer products, we know what we are doing. We stand behind this product 100% and guarantee it will not affect the operation of your machine or your attachment.
It simply bypasses the common language CanBus computer on the attachment and plugs directly into the control solenoids. It does not interact with the machine in any way. We believe this to be a much more reliable way of operating an attachment.  Fewer components always means less down time.

We Also Recommend

Customer Reviews

Based on 4 reviews Write a review


Ask a Question
  • I have a brand new John Deere 324G that did NOT come with any electrical attachment control whatsoever, only hydraulic connections. I am need to run a Bobcat SG60/SN 233000585 stump grinder with the machine. Is the only harness I will need or is there more? Please advise.

    Does the wheel spin with no electrical connected?  If yes, then you do not need this kit.  You can use this one.

    Here is everything you will ever need to know.

    For the JD machine, you need to purchase their control harness, but here are the issues.  You may not have all of the buttons installed so you need to verify that you have 4 on the sticks and a toggle on the cab headliner.  Then the smartest thing to do is in that harness, move A to B which makes the controls universal.  What really sucks about JD is that toggle.  You will need to remove your hand from the controls to move one of the stump grinder functions.  I always recommend installing a Super Controller.  Then you have all of the universal functions you will ever need.

    If you buy one, contact us for the install guide that we made for JD.

  • Will this work on a Bobcat SGX60 stump grinder to go on a CAT 299D3 XE machine? thanks

    Does the wheel spin with no electrical connected?  If yes, then you do not need this kit.  You can use this one.

    Here is everything you will ever need to know.

  • We have a model: TS60V, year: 2014, serial: T3V06000321 skid steer. We need a wiring harness for a left hand joy stick. Will this part, 14 PIN BOBCAT PLANER/WHEEL SAW & SG-60 HARNESS | SG-BPH-14-7-9DP - | SKID STEER GENIUS, work for us?

    That harness is for the Bobcat Brand Planer/Wheel Saw and Stump Grinder.  It is not for your machine controls.  It is for your machine controls to operate those attachments.

  • I need to know if this will fit a New Holland C237

    Yes. Correct, it will fit.

  • I have a Takeuchi TL10V2 and I want to make sure this harness will work with the machine and the Bobcat Planer attachment.

    The harness will work but your machine has only 5 controls where you need 6.  I am working on a new product to fix this issue but I am months away from completion.

  • I have a Takeuchi TL12. Will this harness allow me to use a Cat planer on it?

    Harness specifically states that it is for a bobcat planer. Do you have a bobcat planer or a caterpillar planer

  • I need to purchase your SG-BPH-14-7-9 DP harness but I need the DT06-2s ends for DT06-2S ends for the planer side. Is that possible?

    Try to run the planer with no electrical.  Does the drum spin?  Yes?  Then order this item with teh Deutsch option.

  • Hi there, I have a CAT 299D3XE with a 14 pin connector and have purchased the SG-BPH-14-7-9DP harness. I am trying to attach this to a Bobcat planer. The issue is I don't have enough functions to operate the planer. Please help.

    There are two buttons on your left stick closest to your left thigh.  There are two buttons on your right stick next to the roller.  Then you have to use aux 7 and 8 which are on the upper part of the left side of the dash.  That gives you 6 functions.  This FAQ explains more.!hc-caterpiller-14-pin-explained

  • hello, I have a bobcat WS18 (wheel saw ). I would like to use it on our 2020 cat 289. do you have something that will fit?

    Here you go.  Please click the link.

  • I have a SG-BPH-14-6-9-DP How is it different than the ....-7-... ? I have a 14 pin ASV RT120. It is not addressed in your 'electronic "" sheet that came with it, Are there changes like the Cat or JD? What functions do the pins have? I need to operate a Bobcat SGX 60 grinder. My harness is unused. Do I need to exchange for the -7- ? Dan Zielinski P.D.Woodland Services, Philpot KY

    Can you spin the SG60 up without any electrical installed?  If yes, then the harness you have will work.  Here is a video showing you what to do.

    I would love it if you would send me the pages out of your owners manual showing the pin out along with photos of your joysticks so I can map the button locations.  I met with ASV at ConExpo and spoke with their engineers and even though I told them that customers were asking about the 14 pin option, they said it did not exist and just walked away on me.  Strange.  I am on my own again to figure it out.

  • Can i get it overnighted??

    Yes.  Just choose that option at checkout.

  • How long will it take to get this to Florida

    4 days using USPS unless there is some crazy COVID event going on there locally or on the way.

  • I have a cat 299d2 xps want to know if I get that jumper and the tool in the vidio if I get this harness

    The tool and the jumper are in the kit.

  • is this the harness for a cat 299d2

    It's universal.  You will need to move socket G to A and H to J.  If the attachment is a high flow, you will need to install the high flow jumper because Cat requires it for you to be able to turn on the high flow circuit.  Pin B (Ground) to Bin K for XPS and N for XHP.  Don't blame me.  It's a CAT thing.

  • how can i reach you by phone to order a next day air part . 360-687-3000 Skip Ogden

    Please drop the items you want in the shopping cart and check out, choose overnight shipping and it will come to you quickly from our fulfillment warehouse.  Thanks

  • I have a Cat 272D2 XHP and am looking to run a bobcat 24" cold planer. is this the right part? Does this replace the original bobcat wiring harness on the planer? Also , the planer is a high flow machine. How do I make the skidsteer sense it is a high flow unit or does the kit have the right wiring?

    This harness will replace the original Bobcat controller.  You will need to add the high flow jumper for Cat.  We do not do this because we do not want the liability for all of the people who don't read and will just hook up a high flow machine to a low flow attachment.

  • We purchased this harness to run a Bobcat SG 60X Stump Grinder to run on our 2019 Takeuchi TL12. The issue we are having is that when you plug the harness in the controls all start moving simultaneously. We have tried every conceivable order for the plugs and nothing changes. Is this a wiring issue or a machine issue?

    The harness does not supply power.  It only routes power.  Check the connector on your machine and see if there is something stuck that is providing constant power.  B is ground so put one end of a probe on B and the other on C,D,E,F,G,H and see what you get.  If there is power on them without you pushing a button, the machine needs to go back to a dealer.

  • I have a Kubota svl75-2 with a 14 pin electrical system. I want to use a bobcat sgx60 stump grinder with a 7 pin electrical system. What do I need to get to make it work on my Kubota?

    If the Kubota is newer with SSV controls, you can just install this harness.  Please verify your machine controls and let us know.

  • have a bobcat 7pin harness 24" cold planer/mill, need to put on a JD 14pin. Is this the harness required? 14 Pin Bobcat Planer/Wheel Saw & SG-60 Harness | SG-BPH-14-7-9DP - | How quickly can this be shipped/received?

    Yes, this is the correct harness.  You have to move the ground pin to operate on a JD.

  • I need to call and ask a couple questions. I am a dual Bobcat and Kubota dealer and need your phine number

    All questions are done through a form on our website.  I simply can no longer answer the phone as most of the questions are for the same thing and I simply have no time to answer the same questions over and over.  Before even filling out the form, please check the FAQ section and the video section because I have probably covered your question in detail already.  If you still have a question and fill out the form, I can keep track of any issues you may have.  Otherwise I have no reference and quickly forget about your particular issues.  Here is the FAQ section.  Here is the video section.  Here is the Bobcat attachment selection table.

  • I have a Cat 272D2 XHP and am looking to run a bobcat stump grinder. is this the right part? also, does this replace the original bobcat wiring harness on the stump grinder?

    Yes this is correct.  It bypasses the Bobcat controller and cabling so the grinder will work on anything.   For Cat you may need to add a High Flow jumper if the grinder is HF.  You also need to move pin G to A and H to J.  It's a Cat thing.  Always gotta be different.

  • I have a 2019 Kubota SVL75-2HFWC and need to run a Bobcat Planer, AJN703101, is this the part that I need?

    Yes, this is the correct part number.

  • I have a new Holland 232 and I have a 24Inch bobcat brand cleaner I need the adapter from a 14 pin harness down to their seven pin would this work for me

    This is the correct item.  Thanks

  • Is this what I need for new case TR310 to bobcat SGX60 grinder, 14-7-9DP-

    Correct.  Just make sure you verify the connector style.

  • I have a customer with a Bobcat S650 Skid Steer and a Bobcat 24" Cold Planer both with 7-pin connectors, They purchased a CASE SV280 with a 14-pin connector and they want to use the cold planer on both machines. What is the best way to accomplish this?

    You will need to contact a Bobcat dealer and order a T-Harness.

  • In reference to the question of the 2015 bobcat wheel saw 7 pin to a 2018, Cat 259D high flow could supply me with the part numbers for the harness and jumpers necessary , so I can order them , Thank You

    You are on the correct page.

    14 Pin Bobcat Planer/Wheel Saw & SG-60 Harness | SG-BPH-14-7-9DP - | Skid Steer Genius

  • I have a 2015 bobcat wheel saw 7 pin connector, and I’m trying to hook it up to my 2018 259 high flow skidsteer with a 14 pin connector. Can u confirm that this kit will work. Thank you sir.

    That is the correct harness, but you will need to move Pin G to A and H to J on our connector.  If this is a high flow attachment, you will also need to add a jumper going from ground to K if it is an XPS or B to N if it is an XHP.  Then you can never use this attachment on other machines because the K pin is hot everywhere else so it will blow your fuse.  Welcome to the world of CAT.

  • I have a T300 and i bought a dozer blade made by bobcat/ingersoll rand with a 14 pin adapter already on it, which one would i need for the machine side? it doesn't have one at this point. Thank You

    Our 4014 is great for this application because it provides 4 outputs.  The b]pins may or may not be in different positions, but we supply a tool.  Here is a link to purchase.

  • I have a bobcat mill model BC3-18 SER# AKS 202295 and a kubota SSV65 Skid loader ser# 12608, which cable harness would I need. The left hand controller has 3 push buttons and 2 switches (two way) on it. The mill has the 7 pins, the kubota has 14 spots for pins, but only 9 are installed.

    Are you aware that your mill is rated at a minimum of 22 GPM but your loader is rated at 18 GPM maximum?  If you have high flow, your machine is rated at 28 GPM.  Please sort this out with your dealer before you try to run the attachment.  Also you will need 6 control buttons to operate a mill.  If you have these, then you can run this harness.