Cart 0

SG-GCW-10 - WiFi Back-up Camera System | Skid Steer Genius

  • $395.00

Ask a Question

The Genius WiFi Back-up Camera System for Skid Steer Loaders.  Or, anywhere that you need a camera and cannot get wiring.

This is by far the simplest and highest quality Skid Steer WiFI Back-up camera on the market today.  To operate you just attach it to the back of your machine using the integrated magnets.  Turn on the battery pack and go.  Now you can add a camera anywhere, anytime.

What's Included:

  • WiFi Camera with base magnet joined into the battery pack
  • 720p camera with adjustable visor
  • 5200 ah battery pack with charger and wiring for camera
  • Ram Mount system to cradle your phone
  • Downloadable app for iPhone and Android devices


  • 100 foot range with direct line of site
  • Shorter distance if not direct line of site or in areas with high electro-active interference
  • Resolution: 720p Horizontal x 480p Vertical
  • Transmission Speed: 25 FPS
  • Wireless Standard: IEEE802.11b/ IEEE802.11g/ IEEE802.11n
  • Current Draw: 12V-140ma   24V-80ma
  • Image Sensor: 1/3 CMOS
  • Thermostatically controlled heating system good to -50°f however battery is best operated above -20°f.  Wince the battery is normally mounted above engine compartment, temperature will be different in every condition.
  • Smart Infra-red night vision build into camera comes on only at night to save battery
  • Viewing Angle: Diagonal - 115° x Vertical angle 60° x Horizontal angle 85°
  • Camera time per charge - 18 hours of continuous use.
  • Camera recharge time - 4 hours
  • Battery - 5200 mhA @ 12 Volts
  • Charge Current Max 2A electronically limited
  • Standard charge based on discharge and temperature is 4 - 9 hours
  • Battery Life - 500+ of complete Cycles @ 80%
  • IP69K Outdoor rated
  • Entire base is a rubberized magnet so scratching is minimal and no rust marks left on surfaces

Don't forget you can mount this on any steel device so you can monitor anything in real time.  The uses are endless.

For first time use, you will need to load the app from the App Store or by scanning the QR code on the camera battery body.  The app will load automatically.  From there, turn on the camera by pushing the red button.  Go to your WiFi settings and connect to the camera.  The images will instantly load and the camera will be working.  From then on, as soon as you connect to the WiFi channel the camera will start operating.

A note from the owner Rob:  I designed the first back-up camera system for my Bobcat skid steer loader over 15 years ago.  I thought it was such a good idea that I pieced together the highest quality parts that I could find at the time and build a system that for it's day was the only camera system available for skid steer loaders.  Now, 15 years later, I work with some of the best manufacturers in the world to design machine specific camera systems.  These are no longer car systems pieced together to build a skid loader system.  These are heavy industrial grade systems that are factory tested to take a beating. 

If you look at the marketplace, I see my competition so eager to have a camera system using the cheapest systems they can find just so they have something to offer.  They know nothing about where these cameras are from or what they are designed for.  I do.  Face it folks, they all come from China.  I know that for a fact.  However I work with camera companies that use components from companies such as Sony and Samsung until recently when both of these companies announced they will no longer make components for this market because it is too small. 

Currently we use components from fine South Korean manufacturers that spec out better than Sony or Samsung.  Ask the other guys about any of their components and they will either make it up or have no clue.  I do.  I spec everything.  My factory pressure tests every camera under water before they pack and ship them.  Their cables and connectors are second to none.  They have a room full of engineers that I can contact with issues or questions as well as new design ideas.  That is why you see the latest and greatest always on my sites years before the others even figure out what's going on. 

Now, we are all human and sometimes things still happen so we back up all of our products with a 100% replacement guarantee.  You have a problem and we replace it immediately.  Ask yourself if it's really worth saving a few dollars and investing the time to install a system only to have it fall apart on the first bump. 

My manufacturer actually sells their base auto models to a lot of my competition because they want the cheapest while I want the best.

That's the Skid Steer Genius difference.

We Also Recommend


Have a Question?

Be the first to ask a question about this.

Ask a Question