Cart 0

Genius - Kubota Machine Side Harness - 2 Button Control Only - SVL 75/90 | SG-KB-01-01

  • $220.00

Ask a Question

Kubota Machine Side Harness SVL75 or SVL90 Only - 2 Controls, 1 x 12V Keyed and 1 x Ground Only.

This kit includes:

  1. SG-KB-01 - Connection harness kit
  2. V0511-77320 - SVL-75or SVL90 Connector mount kit

This is the harness that started it all for us and Kubota.  Shortly after the SVL machines were introduced, customers started calling us looking for the mate for this to run their Bobcat Snow Blowers.  We quickly realized that Kubota had only installed 2 buttons in their sticks so they could only run two functions.  This was a disaster so we quickly started designing our Super Controllers to allow operators the chance to run up to 10 controls. 

Since then many customers have called us and stated that they only care about two controls so all they want is the plain old 2 output harness that Kubota supplies.  Their complaint was that they are charging $500 for a harness that looks similar to something we charge a lot less for.  We went to work and here it is.  We have created a kit that is similar to theirs only nicer and cheaper.

We use our top quality outdoor rated cable along with original Deutsch connectors to build a winner of a harness.  We also use proper industry standard strain relief dust caps instead of the Kubota rubber dust caps.  This helps to save your day in case something falls on the connector.  We do this for less than half of the price of the Kubota harness.  This kit is almost 100% completely the same as the OEM kit except for a couple of parts that are easier to install using tie wraps.  Other than that, it installs exactly the same as the Kubota kit.  Have a look at their manual for instructions.

This kit will ship with both the Japanese style connector to plug in directly under your machine and run out to your boom.

We Also Recommend

Customer Reviews

Based on 2 reviews Write a review


Ask a Question
  • Hi I have a 2018 SVL75-2 on harness, would like to run stump grinder , Do you have. Kit for this ,

    If you have the SSV controls, you will need to contact a Kubota dealer to get the machine harness.  Then you can run any stump grinder.

  • I have a 2019 SVL75-2CHW which did not come pre-wired with the 14-pin attachment connector. The left joystick is not the 3 button variety you have spoken of in your other answers, it has the horn button plus two other round buttons and a longer button that tilts when pressed. I wish to run an Eterra 450 concrete mixer and SSS already sent me the 14 pin to 2 pin adapter for it when I purchased the attachment. I have found a blue-taped white four pin plug under the hood which as far as I can tell is the arm harness connector and looks the same as your picture, is this kit the correct one for my machine?

    You will need to contact Kubota and buy the machine harness as ours is for the older models.

  • My order number is 9126 priority mail on 8/14/20 how long will it take to get to dexter mo 63841. thank you

    3 - 4 days.

  • I have ordered this and I want to make sure it will work for my Kubota machine 14 pin?

    If you have an older SVL75 or 90 with only 3 buttons on the top of the left stick, then this is the correct harness.  It will provide only 2 outputs which is what Kubota allowed for on those models.  Any other model or design and this is not the correct harness.  If you are hopin to run a snow blower, this will not work unless you can do with two of the functions like chute angle up and down.

  • I have ordered the Eterra pdx1000 with tilt function from Skid Steer Solutions. I have a 2016 kubota svl 75-2 with two button left joy stick. I was told by Skid Steer Solutions to get the standard harness which is a separate control for the tilt. Isn't it more practical/efficient to get the sg-kb-01-01 instead? Thank you.

    You have two issues.  One for your machine and one for the attachment.  If you have the KB kit installed in your machine, you will get a plug and play kit that will plug in and work.  If you have nothing on your machine, then SSS will ship you a separate switch.  It is your choice.

  • The sg-kb-01-01 seems right to enable a tilt function of the eterra pdx-1000 post driver. My kubota svl 75-2 has the two button left joy stick. Assuming this is the correct product, does the harness come with installation instructions? Thank you.

    Yes it comes with the full Kubota instruction booklet as it is the same unit minus one bracket.

  • We have a Kubota SVL75-2 without the 14pin plug and wish to operate a 6way dozer attachment from Kubota. Will this allow us to operate this unit? Will it plug into the existing harness without cutting/splicing? Are there any additional items we will need? Will the existing buttons on the joy stick sur-fice or do we need to add an additional switch?

    Please read our Kubota FAQ about this.  If you have three buttons on your left stick you will only have 2 controls.  If your blade requires more thatn two controllers, you will need to purchase a controller.

    The FAQ's can be found here.!hc-kubota-svl759095-with-2-controls-running-multiple-functions-1!kubota-14-pin-electric-controls

  • I have a Kubota svl 75 with a 14 pin connection. And I just purchased an HLA - DB 72 dirt blade. Is there and adaptor made for this? So I don’t have to hard wire the rock switch into my machine. There is 3 pins on the hydraulic valve to switch from tilt to angle of the blade.

    I am not sure why they did not furnish you with a 14 pin connection to plug it into your machine.  Can you send me photos of what you have for connections and the control valve please?

  • We are running a Danuser S40 post driver w/tilt on Kubota SVL-90. We have, according to Danuser's website, the correct harness for the driver. We have received and installed GENIUS - KUBOTA MACHINE SIDE HARNESS - 2 BUTTON CONTROL ONLY - SVL 75/90 | SG-KB-01-01. We still cannot get the tilt function to work.

    The pins have to line up or nothing happens. B - Ground. C - Button 1. D - Button 2.

  • Just purchased a 2015 SVL90-2. I already have a quick attach brand stump grinder which has a connector like a 7 pin round trailer type... Would this allow me to adapt over

    Your loader was built with only 2 control buttons.  You can add a Super controller to your machine to allow it to operate more than 2 functions or use the control box that came with the attachment.  Here is more detail.!kubota-14-pin-electric-controls

  • what is your return policy? I have a 2017 Kubota SVL75-2. I am wanting to be able to run my bobcat sweeper attachment. I am 98% sure this is what I need.

    Here is what you need for the attachment.
    Here is what you need for your machine.

    Return Policy can be found at:!returns

  • Kubota SLV95-2 machine needing to run a FAE mulcher head with door. Setup on a Takeuchi TL140 at this time with a 4 pin connector from the dealer (aftermarket harness). It has multiple buttons on both hand controls. As of now only need a harness that will operate the door on the FAE when we put it on the Kubota. Which harness would I need and where is the connector located in the machine? The 14 pin machine coupler is fine because they also supplied us with an adapter to go from 4 pin to 14 pin on the attachment side. Thanks.

    If the machine has a 14 pin, you only need to chop off the connector on the FAE harness and install a 14 pin attachment side connector and you should be good.

  • I have have the svl 75 and have a woods harley rake, the harley rake has 4 flat connects to a control box that i keep in the cab that controls the left and the right, then from the control box is another wire that runs to my battery. Do have a connector so that i can eliminate this control box and use the controls on my kubota joystick. I appreciate your help. Thank you Jared

    You can cut off the connection, but then you will not be able to use the control box again. I would suggest spending a few dollars more and changing the harness. Here is the part number - SG-BPH-14-6-9DP.