Super Controller 14 Pin 10 Controls - Rental Kit | Skid Steer Genius
Genius Super Controller 10 Output: It is now possible to operate any attachment on any machine. Buy this kit only for temporary installations.
We are proud to announce that our new Super Controllers are now in production.
What is a Super Controller? It is pure Genius. We have put our 20 years of product and machine experience along with 30 years of electronic know how to work to solve one of the industries biggest issues. Why won't machine manufacturers allow me to operate all of my attachments on any machine and why aren't there enough controls to do what I want to do?
These issues are now completely in the past thanks to pure Genius! There are several options so please read the descriptions below and choose from the options table.
Series 10 SG-SC-102 - Rental Kit - 10 output, 10 Foot Output Cable - What's included.
This is meant to be a temporary install kit that can go from machine to machine easily.
- Clip on - 2 small joysticks similar to a video game controller that clamp onto any control stick. This gives you 10 controls. 4 more than most machine manufacturers give you today.
- Each joystick has an X/Y 4-way control plus a Z locking button. This allows you to run equipment requiring an always on control.
- A controller interface in a sealed box with mounting magnets so you can easily install it with no labor.
- A 10 foot harness so you can place it directly outside of your machine.
- On the end of the harness is a 14 pin connector on magnets pinned out the old fashioned way. The way things used to reliably work.
- The connector is on magnets so you do not have to permanently install it.
- A cigarette lighter plug so you can instantly power the controller. You can be up and running any attachment in just a few minutes.
Why did we develop this product? We hate the way all of the manufacturers have conspired to make the attachment controls individual to each machine in an attempt to make you have to re-purchase them should you decide to change brands. In the past, owners did not care about this because you did not have much money tied up in attachments or if you did, they did not have many controls. As the modern machines evolved, it would have been easy for all of them to design similar controls or at least pin out the 14 pin connectors the same so that if you had several machines, you could swap the attachments back and forth. Instead, each manufacturer did things like pin the exact connector differently so even though they were the same, they would not work. Others used a different version with 8 pins so they would not interface properly. Still another manufacturer added a computer interface and another different 7 pin connector which was virtually impossible to interface to until we started work in 2010 and built the first after market controller that would work easily with their machines.
That product termed the CanBus controller was so successful that we moved onto the other manufacturers and created what you see here. We realized early on that we could not add buttons to their sticks as it is mechanically impossible. What we decided to do was to create a small joystick control that could easily be added and be as unobtrusive as possible. My personal feeling is that when I operate something, a joystick is much easier than reaching for buttons. People raised over the past 40 years have come in contact with video game controllers and so they should be familiar with this. We are going to be using these on our boom mowers and a joystick will be a much more efficient way to control our mowers because we can actuate both the X & Y axis at the same time. We are really looking forward to getting these out into the field for you to try and welcome your feedback.
If you need to learn more, watch our videos here.
We designed this from the ground up and made the control pack to operate inside your cab easily and reliably. Every part of this was designed by us and we even wrote the software contained in the controller pack. This shows our true dedication to building you something that is truly Genius and not some generic thing that you have to customize.
Bobcat Grader Upgrade:
Do you have a Bobcat Grader 96" or 108". You will need the following additional harnesses and adapters to make this work. Once installed, all functions including side shift will work.
Bobcat T-Harness - 7164095
Bobcat Grader Adapter - SG-BC14-BC14-GR
We welcome your comments and questions.
Installation Instructions Can be Found Here:
Kubota Permanent Install:
Bobcat Permanent Install:
Cat 299D Permanent Install:
We Also Recommend
SG-CB-2000X-100 - 100 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-1000-100 - 100 Pack, 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius
SG-CB-4014 - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius
SG-CB-2000X-100 - 50 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius