Hello I have a 2019 bobcat it’s a 595. I bought the wolverine mixer and I need the wiring harness adapter. Just wanna make sure I purchased the right one and how long does it take to come in. I’m in Muskegon, MI 49445.

CLICK HERE FOR THE BUNDLE

These mixers don't last long and there is no such thing as Wolverine so if and when it stops, Eterra has the #1 rated mixer in the country.  I have visited the factory in China where they are made and bought samples and whoa, their quality is really bad so buyer beware.

Chinese attachments are being dumped on RB Auctions in record numbers.  As of the publish dates, these are the brands.  Generally, they dump them at auctions, they don’t work so they change the brand name and start dumping again.  This is really a case of you get what you pay for.  Shame on RB for allowing this to happen!  A few items will last a while but when they blow, you will need a machine shop to manufacture the parts since companies do not exist.  If there is an address, it is fake or a mail drop.  I am putting them all on one page since most items are the same, they just have a different name stuck on them.  

Land Honor, Wolverine, Great Bear, Suihe, Top Cat, Mower King, TMG, American Manufacturing & Titan.

have a caterpillar cold planner PC412 hooking to a bobcat 650

You need a new harness.
https://www.skidsteergenius.com/collections/bypass-cable-kits/products/sg-bph-14-6-9-dp


and a controller.

https://www.skidsteergenius.com/collections/7-pin-controllers/products/sg-cb-6014-genius-7-pin-6-output

i have a bobcat T650 with no connector need to control a twin solinod concrete mixer which wiring harnesses do i need to operate a syoushi hydraulic 4we10g31/cg24n9z5l

Chinese attachments are being dumped on RB Auctions in record numbers.  As of the publish dates, these are the brands.  Generally, they dump them at auctions, they don’t work so they change the brand name and start dumping again.  This is really a case of you get what you pay for.  Shame on RB for allowing this to happen!  A few items will last a while but when they blow, you will need a machine shop to manufacture the parts since companies do not exist.  If there is an address, it is fake or a mail drop.  I am putting them all on one page since most items are the same, they just have a different name stuck on them.  

Land Honor, Wolverine, Great Bear, Suihe, Top Cat, Mower King, TMG, American Manufacturing

NOTE:  These companies do not exist so don't waste your time trying to contact them because you are on your own.  All materials are China sourced so you will need to fabricate your own repairs, but hey they are cheap to buy.

______________________________________________________________________________

For all Chinese Attachments:

Verify the voltage of the solenoids as many of them ship with 24 volt solenoids.  You must replace the solenoid coils with 12 volt rated ones for the attachments to work.  Here is a link to replacement coils.

Click Here to Order a Replacement 12 Volt Coil

______________________________________________________________________________

Wolverine Cement Mixer - This is a copy of an American designed and manufactured Star Industries Scoop and Mix.

It uses one solenoid for control of the chute.  It does not come with the hose and it is metric so you will need to make a new chute if you want a hose or find a metric hose somewhere.  The primary pump action will cause the paddles to operate.  By pushing a control button, the solenoid will fire and allow the oil to travel through the chute hoses to the cylinder.  This will only happen if you push the button and operate the hydraulics at the same time.

Here are the kits.

Click Here for the 14 Pin Control Kit

Click Here for the 8 Pin Control Kit

Click Here for the Generic Switch Control Kit

Click Here for the Bobcat 7 Pin Control Kit

 Great Bear Cement Mixer

______________________________________________________________________________

Suihe/Land Honor Articulating Mower – This is a copy of an American designed and manufactured CID Swing Boom.  CID reports that many people are contacting them for warranty because they are falling apart.  This is not a CID product.  It is a Chinese copy.  You get what you get.

Uses 4 solenoids with 2 pin Deutsch connections – Tilt out/In and swing back and forward. 

Click Here and choose the Deutsch option for all 14 pin machines like Kubota, Cat D, New Holland, Case, John Deere, Takeuchi

Click Here and choose the Deutsch option if you have an ASV, Terex or Cat A,B, C series.

Choose both of these options if you own a modern Bobcat with a 7 pin connection.

Click Here for Modern a Bobcat Harness - Choose the Deutsch Option

Click Here for a Modern bobcat 7 Pin Control Option

______________________________________________________________________________

Land Honor Grader - Possibly 24 volt Solenoids - You must verify and contact us for a resolution.

6 Solenoids – Deutsch Connections

Click Here and Choose the Deutsch Option for all 14 pin machines like Kubota, Cat D, New Holland, Case, John Deere, Takeuchi

______________________________________________________________________________

Suihe/Mower King Attachments

Cement Mixer - 24 or 12 volt.  If 24 volt, you must replace the solenoid coils for anything to work.

Use two coils.  

Purchase this harness if you have a 14 pin machine:

Click Here if you have a 14 pin machine:

Choose this harness if you have an 8 pin machine like a Cat ABC series, ASV or Terex.

Click Here if you have an 8 pin machine like a Cat ABC series, ASV or Terex.

Choose the next harness and controller (2 items) if you have a modern Bobcat with a 7 pin output connector.

Click Here for the Attachment Harness

IS THERE AN OPTION TO GET THIS HARNESS BUT WITH A 7 PIN CONNECTION ON THE END? OR STEER ME IN THE DIRECTION OF WHAT I CAN GET TO MAKE THIS WORK ON MY NEW BOBCAT S76? THANK YOU!

We have many 7 pin options for controls.  Can you tell us what you are trying to operate please?

I'm bidding a Kubota with 14 pin and need to match a BC snow thrower and angle broom. They asked for 9 pin connection. would this be the correct adapter?

A modern Bobcat Snow Blower uses a 7 pin CAN controller which is 7 pin. 

CLICK THIS LINK FOR A HARNESS

Is this the harness kit I need to convert a Bob Cat back hoe to operate on a new Kubota SVL75-2 with factory installed 14-pin connector?

Which Backhoe?  If you have a mini backhoe, please read and watch this.

https://www.skidsteergenius.com/apps/help-center#bobcat-quciktach-backhoe-explained

https://youtu.be/lOOo4tvUGZ8

If this is a stationary backhoe like a 709, then don't do it.  Those backhoes are made specifically for Bobcat and have frame mounts that protect the operator should the quick attach pins break.  There are many widows out there because of this issue.  I won't be part of anything to do with mounting these because they are death machines.

Do you have the machine side for a slv75-2 2021 ?

That is the same as Bobcat so this will work.

Good day, How long is the cord? And is there any pin changes needed for a Takeuchi TL240?

It is 9 feet long.  No because the first 4 primary connections are the same.  You will only be using 2 so you are all good.

Is this the one on your video for the wolverine mixer

Yes.

I have an older Bobcat Power rake (Harley rake) with the Deutsch 14 pin connector from the attachment. I have the 14 pin male plug on the machine and need the female 14 pin for the attachment side and harness with the 4 female spade plugs on the attachment...looks like the picture. I just want to confirm that this is the right plug and harness that I will need.

If your Harley only has two solenoids, then this is the correct harness.

Hi - Will this Harley Rake adapter (SG-BC14-SP4-9) plug directly in to my SG-CB-4014 unit that I use for my Bobcat on other implements?

It will work as long as the connections are correct on your attachments.  We have several types of connections available.

This has a female plug, right? Also, what is the length of the harness?

The Bobcat side has sockets so it is called a female.

RE #5991389. Would I use the SG-BC14-SPA-9 adapter for my 2 wire dozer connection also ?

If your dozer has a maximum of two controls and uses spade connections on the solenoid.