Menu
Cart 0

SG-CB-60DP8 - Genius 7 Pin (6 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 6 Port | Skid Steer Genius

  • $795.00

Ask a Question

New for 2022.  Our controllers are getting smaller and smaller.

This is a true Genius Controller designed for solenoid controls only.  Our customers spoke and we listened.  You asked us to create a Delphi 8 pin output connector style controller so you could plug Delphi 8 pin (FFC) attachments directly to your Bobcat® machines without using a box control and we listened. 

Here it is.  The new SG-CB-60DP8 controller.  It is a 6000 series, 6 output controller with a Delphi 8 pin connector pinned for FFC attachments.  

Programming: This new controller will allow the user to program the momentary circuits to be latching if desired.  Because of over current issues with your machine, you can program one out of each switch group only to be latching. Once you set these settings, they will hold inside the controller and you will not have to set them each time you start your machine.  You will be able to change them at will for different attachments.

  • A1/A2 - Pin B/C one can latch while the other will remain momentary.  These two functions do not work on Toolcat, Versahandler and hand foot control machines.
  • B1/B2 - Pin D/E one can latch while the other will remain momentary.
  • C1/C2 - Pin H/A one can latch while the other will remain momentary.
Because of fuse and circuit limitations, any combination of 2 will work at the same time.  If you try to make three latch, the circuit will reset and you will have to reprogram the adapter.  

    This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 6 x 12 volt solenoids directly from the stick controls of your Bobcat®.  Works on Bobcat® skid steer loaders as well as Toolcat and Versahandler machines.  

    Takes about 1 minute to install.  Is 100% plug and play.  This configuration is for boom mount so you can use it over and over on any attachment that has up to 6 solenoids to control.  This is complete and ready for plug and play directly into any Bobcat® branded machine.  It has power, communication, and a port status indicator LED to show you that it is working and that it is receiving commands from the Bobcat® machine.

    Throw away the crappy control box that the manufacturers supply and switch over to true machine controls.

    Bobcat 2020+ Versahandler 923 - DOES NOT WORK WITH THIS MODEL BECAUSE IT DOES NOT HAVE AN ACD CONTROLLER.

    Disclaimer: 

    This is not a Bobcat® product.  This product is not endorsed by Bobcat®.  We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls.  It is perfectly safe to use and will not damage a thing.  If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us.  Skid Steer Genius is a specialty controls company.  Our goal is to make anything you buy for your machine work on any machine.  Others design and build in such a way as to stop you from doing this.  

    Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
    Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.

    All rights reserved.


    We Also Recommend

    QUESTIONS & ANSWERS

    Ask a Question
    • I'm connecting a spartan 6 way grader https://www.spartanequipment.com/products/skid-steer-grader-attachment-laser-system-optional.html to a 2006 bobcat T190. I have the 7 pin round connector on my bobcat installed. Im wanting to order a SG-CB-60DP8. I believe this is the correct adapter box, but I wanted to confirm. The grader box has solenoid's for control. It looks like I will need one more harness to go from the rectangular 7 pin plug coming out of your box to the solenoids. Can you verify I have the correct part for the box, and then let me know what part number I need from the box to the grader solenoids. I'm fine to wire up the solenoid end but will need to match the connector at the box.

      As you know, Spartan is an online reseller that makes nothing.  I need you to look into the manual and find the manufacturer and see if there are any schematics so I can see how it needs to be set up.  There needs to be something from them on how to set up the receivers.  I need to see what is required.  

      Also send us some photos of the control block and connections.