CAN Adapters | SG-CAN-PRO-XX - 14 Pin CAN Connect Pro For Bobcat® Attachments | Skid Steer Genius

Name: CAN Adapters | SG-CAN-PRO-XX - 14 Pin CAN Connect Pro For Bobcat® Attachments | Skid Steer Genius
Brand: Skid Steer Genius
Price: 1495.0 USD
Availability: InStock

by Skid Steer Genius

$1,495.00 - $1,495.00

$1,495.00

$1,495.00 - $1,495.00

$1,495.00

Quantity

Description

CAN Pro Controller

Run Bobcat CAN attachments on non Bobcat machines in seconds.

The CAN Pro is a patent pending controller that plugs into most 14 pin skid steer or compact track loader connectors and converts your machine’s 12 volt outputs into the CAN communication language used by Bobcat attachments.

This allows your attachments to operate exactly as if they were connected to a Bobcat loader.

Using proprietary technology, the CAN Pro spoofs the Bobcat communication system, allowing the attachment to recognize and respond to your machine’s controls.

If you operate Kubota, CAT, New Holland, Takeuchi, Wacker Neuson, or other 14 pin machines, you can now run your Bobcat CAN attachments with full control.

Simply plug it in and go.

Built for Mixed Fleets

The CAN Pro was designed for contractors who run multiple brands of machines but own Bobcat attachments.

Instead of converting attachments or buying duplicates, the CAN Pro allows you to move attachments freely between machines.

This is especially valuable for:

• Contractors running mixed fleets
• Companies replacing Bobcat machines with another brand
• Equipment dealers competing against Bobcat bids
• Rental yards renting Bobcat attachments to non Bobcat machines

With the CAN Pro, you are no longer locked into one machine manufacturer.

Simple Plug and Play Operation

Installation takes about one minute.

Plug the controller into your machine’s 14 pin connector, connect it to the attachment, and operate the attachment directly from your controls.

If you can plug a connector into a receptacle, you can run the CAN Pro.

An integrated LED indicator confirms the controller has power and is receiving commands from the loader while transmitting signals to the attachment.

How It Works

The CAN Pro reads the 12 volt outputs from your machine’s 14 pin connector and converts them into the CAN commands required to actuate Bobcat attachment solenoids.

This process happens instantly through an onboard microprocessor and driver circuit, creating a seamless communication bridge between the machine and the attachment.

Unlike simple wiring adapters, the CAN Pro is an active electronic controller that translates machine signals into the CAN communication language used by Bobcat attachments.

This is why it performs like a factory connection.

Important Hydraulic Note

Bobcat hydraulic couplers are reversed compared to most manufacturers.

Before using the CAN Pro you must reverse your hydraulic couplers.

For mixed fleets, many operators either:

• Swap couplers on the new machine
• Keep a set of gender changers in the cab for quick connection

When You May Not Need CAN Pro

If you only have one or two Bobcat attachments and want to run them on a different brand of machine, a bypass harness may be a simpler and lower cost solution.

Bypass harnesses are direct wired connections with no electronics.

The CAN Pro is designed for operators who want full functionality and the flexibility to move attachments between multiple machines.

Key Features

• Patent pending CAN translation technology
• Converts 12 volt machine outputs to Bobcat CAN communication
• Plug and play installation in about one minute
• Compatible with most 14 pin skid steer connectors
• Operates Bobcat CAN attachments on non Bobcat machines
• Integrated LED power and signal indicator
• Supports attachments with up to 8 control functions depending on machine configuration
• Reusable plug mount design for use across multiple machines and attachments

What Is Included

• CAN Pro Controller with up to 8 output controls depending on machine configuration
• 14 pin machine connector compatible with most manufacturers
• Installation instructions
• Direct factory support from Skid Steer Genius

Note: John Deere machines prior to 2020 may require a power pin upgrade kit for the 14 pin connector.

Built for Real Equipment Use

The CAN Pro is not just a wiring adapter.

Inside the controller is a microprocessor running dedicated software and an integrated driver circuit that translates machine outputs into CAN commands for Bobcat attachments.

This is what allows true plug and play operation across multiple machine brands.

Show full description +

Technical Information

Attachment Compatibility

Not Compatible

• Bobcat Chipper

Not compatible. Uses a RACS controller.

• Bobcat Concrete Pump and Mixer

Not compatible. Uses a RACS controller.

• Tree Spade

Tested with TS36 and TS44.

Will not work due to the number of control functions required.

Compatible Attachments

• Bobcat 84 inch Grader without lasers

• Bobcat 96 inch and 108 inch Graders

• Aftermarket laser workaround currently in development

• Bobcat laser receivers are not supported at this time

• External laser receiver kit in development

• Rotary Broom

• Soil Conditioner

• Bob tach mounted Mini Backhoe

• Box Blade

• All models of Cold Planers

• Snow Blower

• V Plow

• Stump Grinder

• Wheel Saw

Machine Compatibility

CAT Next Gen and Develon

Part Number: SG XTCMX CT

Compatible with CAT D255, 265, 275, and 285 Next Gen Series and Develon machines.

• Specially pinned to match Bobcat control functions as closely as possible

• AUX 8 must be used for power

• AUX 7 functions as a shift key, providing four additional functions for a total of 8 functions from 4 buttons

High Flow Attachments

A hidden jumper inside the connector allows high flow activation.

Manual connection required:

• Connect to K for XPS

• Connect to N for XE or XHP

John Deere

Part Number: SG XTCMX JD

• Compatible with 2020 and newer machines with a Pin K power pin

• Provides 8 functions directly from the sticks on P Series machines

For G Series machines, contact us if more than 6 functions are required.

Older machines can be upgraded with a power pin kit added to the 14 pin connector.

Case

Part Number: SG XTCMX KB

• Machine must have enough controls installed for the required functions

• Contact us for machines requiring more than 6 functions