Skip to content
Learn More About our 7-Pin Bobcat Adapters
Need a 7-Pin Bobcat Adapter? Click here!
Adapters

Adapters

Welcome to the best place online to find the correct adapter for your skid steer machine and attachment application. With the right electrical adapter harness, you can make any machine work with all attachments - the Skid Steer Genius way.

Shop all
  • 7 Pin Bobcat CAN Adapters
    7 Pin Bobcat CAN Adapters
  • Electrical Adapters
    Electrical Adapters
  • Adapter Parts
    Adapter Parts

Top Selling 7-Pin Bobcat Adapters

CAN Adapters | SG-X-CAT-XX - Genius - 7 Pin Converter For Bobcat® Attachments | Skid Steer Genius

Skid Steer Genius
$1,495.00 - $1,495.00
$1,495.00
$1,495.00 - $1,495.00
$1,495.00

NOTE:  THE FIRST RUN IS SOLD OUT!  WE ARE LEAVING THIS PAGE OPEN SO THAT YOU CAN ORDER AND BE FIRST IN LINE FOR THE NEXT RUN WHICH WILL START SHIPP...

View full details
$1,495.00 - $1,495.00
$1,495.00
$1,495.00 - $1,495.00
$1,495.00
CAN100 12 Output Bobcat 7 Pin Adapter
Battle Ready case designed and built in a Department of Defense approved facility.

CAN Controller | 7 Pin (12 Output) Controller For Bobcat® Pilot Controlled Loaders - 12 Port | SG-CAN100-14 | Skid Steer Genius

Skid Steer Genius
$1,295.00 - $1,295.00
$1,295.00
$1,295.00 - $1,295.00
$1,295.00
In stock

Welcome to our new Battle Ready 12 Channel CAN controller for Bobcat loaders.  12 channel output controller for Bobcat Pilot Controlled machines on...

View full details
$1,295.00 - $1,295.00
$1,295.00
$1,295.00 - $1,295.00
$1,295.00

CAN Controller | 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port - CAT/ASV/Terex| SG-CAN60-08 | Skid Steer Genius

Skid Steer Genius
$950.00 - $950.00
$950.00
$950.00 - $950.00
$950.00
In stock

Bobcat 7 Pin CAN to CAT ABC Series 8 Pin Only (4 Outputs).  Works with ASV/TEREX also, by moving one pin (H TO G). Buy this adapter if you have a ...

View full details
$950.00 - $950.00
$950.00
$950.00 - $950.00
$950.00
Battle Ready case designed and built in a Department of Defense approved facility.

CAN Controller | 7 Pin (6 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 6 Port | SG-CAN60-14 | Skid Steer Genius

Skid Steer Genius
$950.00 - $950.00
$950.00
$950.00 - $950.00
$950.00
In stock

Introducing the New CAN60 Genius Controller for Bobcat 7 Pin machines to 14 pin attachments. After three years of addressing persistent parts sourc...

View full details
$950.00 - $950.00
$950.00
$950.00 - $950.00
$950.00

CAN Adapters | 7 Pin (6 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 6 Port (QTY 1) | SG-CB-6014 | Skid Steer Genius

Skid Steer Genius
$865.00 - $865.00
$865.00
$865.00 - $865.00
$865.00
In stock

This item has been retired and replaced by the CAN60 series of controllers which are even more compatible and durable.  We also have new programmin...

View full details
$865.00 - $865.00
$865.00
$865.00 - $865.00
$865.00
Shop all Adapters
Adapter Products Shop all
Adapter Products Shop all

CAN Adapters | 7 Pin (6 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 6 Port (QTY 1) | SG-CB-6014 | Skid Steer Genius

Skid Steer Genius
$865.00 - $865.00
$865.00
$865.00 - $865.00
$865.00
In stock

This item has been retired and replaced by the CAN60 series of controllers which are even more compatible and durable.  We also have new programmin...

View full details
$865.00 - $865.00
$865.00
$865.00 - $865.00
$865.00

CAN Adapters | 7 Pin Controller For Bobcat® Loaders - 2 Port | SG-CB-2000A-100 | Skid Steer Genius

Skid Steer Genius
$545.00 - $545.00
$545.00
$545.00 - $545.00
$545.00
In stock

 This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 2 x 12 volt solenoids directly fr...

View full details
$545.00 - $545.00
$545.00
$545.00 - $545.00
$545.00

Harness Connectors | Deutsch HD Dust Cap - Machine Side - 8 or 14 Pin Deutsch | LI-HDC-36-18 | Skid Steer Genius

Skid Steer Genius
$35.50 - $35.50
$35.50
$35.50 - $35.50
$35.50

Original Deutsch Dust Cap If you have damaged or lost the aluminum dust cap that came on your machine to cover your 8 or 14 pin connector, then thi...

View full details
$35.50 - $35.50
$35.50
$35.50 - $35.50
$35.50

Connector | Trident 7 Pin Female Connector for Bobcat - Machine Side (QTY 1) | SG-KIT-TRIDENT-F | Skid Steer Genius

Skid Steer Genius
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00
Low stock

Machine Side Connector - Female   Fits Bobcat only. From the moment we released our attachment side kit, our email and phones have been inundate...

View full details
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

Wire Adapter | Deutsch HD 14 Pin | Plug and Play Dual Output | SG-PP2-14 | Skid Steer Genius

Skid Steer Genius
$265.00 - $265.00
$265.00
$265.00 - $265.00
$265.00
In stock

Use this plug and play adapter if you have up to two solenoids to operate that have existing 2 pin Deutsch receptacles and you need to connect to y...

View full details
$265.00 - $265.00
$265.00
$265.00 - $265.00
$265.00

Adapter | Machine Side John Deere 14 Pin to Attachment Side Cat D Series 14 Pin | SG-JD14-CT14 | Skid Steer Genius

Skid Steer Genius
$285.00 - $285.00
$285.00
$285.00 - $285.00
$285.00
In stock

Here's a Genius idea.  Why not allow people with Caterpillar attachments run them on their John Deere Skid Steer Loader?  This adapter does just th...

View full details
$285.00 - $285.00
$285.00
$285.00 - $285.00
$285.00

Connector | Trident 7 Pin Male Connector for Bobcat - Attachment Side (QTY 1)| SG-KIT-TRIDENT-M | Skid Steer Genius

Skid Steer Genius
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00
In stock

Fits Bobcat only. This is the connector that so many of you have hunted for for years. We certainly did. If you have damaged the connector on your...

View full details
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

Connector | Deutsch 14 Pin Male Kit - Machine Side (QTY 1) | SG-KIT-DT-14-M| Skid Steer Genius

Skid Steer Genius
$135.00 - $135.00
$135.00
$135.00 - $135.00
$135.00
In stock

Fits Bobcat, John Deere, Takeuchi, New Holland as well as others.  Includes 14 pins & tool.  You will need to solder or crimp wires to pins.  T...

View full details
$135.00 - $135.00
$135.00
$135.00 - $135.00
$135.00

Electrical Adapter | Deutsch HD 14 Pin Female Machine Side Bobcat 14 Pin to Attachment Side John Deere 3 Pin | SG-BC14-JD03A | Skid Steer Genius

Skid Steer Genius
$265.00 - $265.00
$265.00
$265.00 - $265.00
$265.00

Here's a Genius idea.  Why not allow people with John Deere 3 Pin controlled attachments run them on their Bobcat Skid Steer Loader?  This adapter ...

View full details
$265.00 - $265.00
$265.00
$265.00 - $265.00
$265.00

Connector | Deutsch 8 Pin Female Kit - Attachment Side (QTY 1) | SG-KIT-DT-8-F | Skid Steer Genius

Skid Steer Genius
$135.00 - $135.00
$135.00
$135.00 - $135.00
$135.00
In stock

Fits old Cat, ASV and Terex. Includes 8 sockets & tool.  You will need to solder or crimp wires to pins.  These are the original OEM connectors...

View full details
$135.00 - $135.00
$135.00
$135.00 - $135.00
$135.00