Skip to content
Canadian & international orders may have added tariffs, duties, and shipping. Click to Learn More.
Canadian & international orders may incur additional fees. Learn More.
7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port - CAT/ASV/Terex| SG-CAN60-08-XX | Skid Steer Genius

7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port - CAT/ASV/Terex| SG-CAN60-08-XX | Skid Steer Genius

by Skid Steer Genius
$53.00 - $1,003.00
$950.00
$53.00 - $1,003.00
$950.00
SKU SG-CAN60-08
Description

Bobcat 7 Pin CAN to CAT ABC Series 8 Pin Only (4 Outputs). 

Works with ASV/TEREX attachments also, by moving one pin (H TO G).

Buy this adapter if you have a Bobcat e/w a 7 pin CAN connector and you would like to operate 8 pin 12 volt solenoid operated attachments from old 2015 and prior CAT ABC Series and ASV/Terex only.  These attachments are rare so make sure that is exactly what you have.  If not, you probably need our SG-CAN60-14 pin output adapter.

Outputs Include:

  • A1/A2 (Pins C/D): One or both can be configured to latch, while the others remain momentary.
  • C1/C2 (Pins B/H): Momentary operation only.
  • (Ground A&E): Constant output.

 

If you plan on moving a lot of pins on your attachment, please note that we supply free single use tools.  If you want something more, please click below for the commercial version of these tools.

CLICK HERE TO ORDER THE COMMERCIAL DUTY TOOL FOR 8 PIN CONNECTOR

 

Technical Information

The CAN60-08 Features Include:

  • Software guaranteed to operate on all Bobcat machines which include Pilot Control, Hand/Foot Control, Toolcat, Versahandler and now the Imported Bobcat machines from the Czech Republic.
  • A molded plastic housing with extra cable retention.  NO MORE RESIN, YAY!
  • Cable retention whereby the connectors will tear off first if you have an accident, so it can be repaired.
  • Embedded 2 x 125 b. magnets to hold it onto your machines frame in multiple locations.
  • Higher and lower temperature tolerance.
  • 9 Amp output per channel which is regulated to 15 amps max to protect your machines fuse.
  • A more common sense LED output makes it easy to see what is going on with the controller.
  • Extra output protection from Chinese dirty solenoids.
  • This is a true Genius Controller designed for solenoid controls only.  

The CAN60 is a 4 output controller with a 14 pin connector pinned the old fashioned way.  Using the old Cat 8 pin layout which works with CAT A, B or C Series Attachments. 

Because of fuse and circuit limitations, any combination of 2 will work at the same time. This adapter ships with all outputs set up for momentary only.

This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 4 x 12 volt solenoids directly from the stick controls of your Bobcat®.  Works on Bobcat® skid steer loaders as well as Toolcat and Versahandler machines.  

Takes about 1 minute to install.  Is 100% plug and play.  This configuration is for boom mount so you can use it over and over on any attachment that has up to 6 solenoids to control.  This is complete and ready for plug and play directly into any Bobcat® branded machine.  It has power, communication, and a port status indicator LED to show you that it is working and that it is receiving commands from the Bobcat® machine.

Throw away the crappy control box that the manufacturers supply and switch over to true machine controls.

Bobcat 2020+ Versahandler 923 - DOES NOT WORK WITH THIS MODEL BECAUSE IT DOES NOT HAVE AN ACD CONTROLLER.

CLICK HERE FOR OUR FAQ

User Manual
CAN60 USER MANUAL
Disclaimer

Disclaimer: 

This is not a Bobcat® product.  This product is not endorsed by Bobcat®.  We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls.  It is perfectly safe to use and will not damage a thing.  If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us.  Skid Steer Genius is a specialty controls company.  Our goal is to make anything you buy for your machine work on any machine.  Others design and build in such a way as to stop you from doing this.  

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.

All rights reserved.

Videos

CAN60 INTROUCTION VIDEO