SG-KIT-DT-14-M - 14 Pin Male Kit - Deutsch - Machine Side | Skid Steer Genius
Fits Bobcat, John Deere, Takeuchi, New Holland as well as others. Includes 14 pins & tool. You will need to solder or crimp wires to pins. These are the original OEM connectors used on all of the machines and not a poor quality knock-off. With decades of experience, you can count on us to supply you with everything needed in this kit. Others sell you just a part and you have to find and order the accessories just to make this connector work. We do it all for less.
- 1 Receptacle Deutsch Body
- 1 Barrel Top Cap and Seal/Strain Relief
- Nut & Locking Washer
- 14 Male Pins
- Installation Tool
- Detailed Instructions Tailored for Skid Steer Use
Kit does not include crimping tool or soldering tool to connect pins to wire or dust cap.
About these connectors:
Many years ago we had to buy these from the dealers for $120 each or with full harnesses for $350+. My background is in electronics and I have seen many connectors like this in the past. I knew they were not worth what they were charging. The problem was sourcing them. They are a German made connector and the part numbers used in the USA came up always taking us back to the dealers.
I traced them back in Germany and finally found an importer that would allow us to buy them if we bought enough. We took the risk because we used them on our attachments and we knew our customers would want them. Well, we were right. This is one of our top selling items based upon quantities sold.
We bring these in and kit them with everything you need to add to your harness. We are sure you will see just how much effort we put into this item just to save you money. These are the original German connectors used by all of the major manufacturers. We also offer real live support 24/7 so if you have an issue and need advice, we are there.
We Also Recommend
QUESTIONS & ANSWERSAsk a Question
I need a 14 male pin. To 7 male pin
I need just the pins for my 14 pin connector. Do you sell them? 14 ga wire
All of the different pin and socket kits can be found.
BY CLICKING HERE
Can you send your W9 to my email listed? I need to give our accounting department some information prior to ordering.
I am unable to see your email until you respond to this.
Do you have this as a set with the female coupler also included, or can I buy the female coupler to go with it? Also I am mounting on a kubota svl95-2s which has the Deutch coupling on it already, I assume this should fit on that mounting plate?
Yes. The female is right next to the male on our web site. Here is the link.
Is the diagram that comes with this kit explain which colored wire goes into each specific sockets???
Yes, but it is for our harnesses. There are thousands of different harnesses that these are used on including Gerry Rigged home made ones so you are always best to test your wiring and map it on a piece of paper prior to starting a connector install.
Here is how I do it.
Is there a wiring diagram that comes with this item?
Would this fit a CAT skidloader (279C)? We are wanting to run a bobcat soil conditioner with our CAT. The soil conditioner already has a deutsch 14 pin female wiring harness installed on it. Thanks!
No. A Cat C series has an 8 pin connection. Does your machine not have anything already installed?
I am looking for the tractor side---Male 14 pin plug with pins, pin tool, & crimp tool for the connector on my Wacker Neuson WL37 compact wheel loader-----pin out should be the same as the Case skid steers. Would you have the wire color code and the pin location for this machine as well?
This is the correct item. I do not have any machine specifics. Sorry.
I just received my "male" 14 pin connector and can only find instructions sheets bag with black sleeves and strain relief, but no connector body or pins. I opened package two days ago and can't find it. I doubt that I would have missed this. Help please Keith Newbury 2565 Pennsylvania Ave Harbor Springs, MI 49740. Packaing is now gone was digging thru the trash and looking at barn and wanted to make sure it wasn't in my hunting clothes.
All of these come prepacked from the manufacturer with everything in a factory sealed bag. They must be lost in your home. We don't really have parts so we will have to destroy another package to get you the parts you are requesting. I will see what we can do.
Do you have wiring harness that goes from Takeuchi TL12V2 to a Cat PC 406 mill head that will operate the mill head correctly?
If this is a new planer that is tagged as a SMART attachment, there is no way to get this to work. Cat has chosen to go down the Bobcat route and use computer control modules to effectively lock you out of using their attachments on anything but CAT. Until I can get my hands on one of these and see if I can rip these controls out like I have done on Bobcat attachments, I cannot tell you for sure but as of today, this would be a no go.
It's simple though. Just do not buy anything from Cat. These are made in Italy by Simex as as the Bobcat planers. I have been in the factory and watched them being built. You can just buy a Simex planer if you want a similar unit that doesn't have all of the crap.