Menu
Cart 0

SG-CB-1000A-100 - Genius - 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius

  • $345.00

Ask a Question

This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 1 x 12 volt solenoid directly from the stick controls of your Bobcat®.  Works on Bobcat® skid steer loaders as well as Toolcat® and Versahandler® machines.  

New for 2021 - New output to plug into most attachment harnesses.  We changed from a female receptacle to a male plug to match most manufacturer's harnesses.  If this does not work for you, we do have adapters.

New for 2016 - Latching Output.  Due to the success of the new 2 channel model, we have taken our engineering to the next level and added a latching function.  Tap the top left paddle and the unit will latch so you can do your secondary function without having to hold your thumb in place.  Tap it again and it releases.  Tap the lower paddle and it acts in a momentary function only.  Pure Genius!

Takes about 1 minutes to install.  Is 100% plug and play.  This configuration is for plug mount so you can use it over and over on any attachment that has one solenoid to control.  This is complete and ready for plug and play directly into any Bobcat® branded machine.  It has an indicator LED to show you that you have power and that it is receiving commands from the Bobcat® machine.

What is included:

  • CanBus Controller with 1 output.  Up or down control from your left stick. SG-CB-1000A
  • 1 x 2 Pin Deutsch connector to connect to your attachment solenoids from the controller.
  • Easy to Follow Instructions
  • Incredible factory support that is not available anywhere but from Genius.

Read more about how this product functions here.

This is not just a plug in adapter.  There is a microprocessor with software loaded along with a IC driver circuit that enables this to work.  That is why it costs more than just a plain old connector.

Bobcat 2020 Versahandlers - DOES NOT WORK WITH THIS MODEL BECAUSE IT DOES NOT HAVE AN ACD CONTROLLER. 

Disclaimer: 

This is not a Bobcat® product.  This product is not endorsed by Bobcat®.  We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls.  It is perfectly safe to use and will not damage a thing.  If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us.  Skid Steer Genius is a specialty controls company.  Our goal is to make anything you buy for your machine work on any machine.  Others design and build in such a way as to stop you from doing this.  

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.

All rights reserved.


We Also Recommend

Customer Reviews

Based on 1 review Write a review

QUESTIONS & ANSWERS

Ask a Question
  • Will this work for my cid swing backhoe that works the swing function only also how long is it it will be used on my 2015 s530 bobcat with hand foot controls

    As long as the backhoe has a single solenoid it will work.

  • Will this work on a 2021 Bobcat R series T76 to run a wolverine mixer.

    We developed a kit for Wolverine.  Please double check the connections becase they do alter the product from time to time.

    CLICK HERE

    Please read the following write-up that I prepared some time ago.

    Chinese attachments are being dumped on RB Auctions in record numbers.  As of the publish dates, these are the brands.  Generally, they dump them at auctions, they don’t work so they change the brand name and start dumping again.  This is really a case of you get what you pay for.  Shame on RB for allowing this to happen!  A few items will last a while but when they blow, you will need a machine shop to manufacture the parts since companies do not exist.  If there is an address, it is fake or a mail drop.  I am putting them all on one page since most items are the same, they just have a different name stuck on them.  

     

    Land Honor, Wolverine, Great Bear, Suihe, Top Cat, Mower King, TMG, American Manufacturing

    NOTE:  These companies do not exist so don't waste your time trying to contact them because you are on your own.  All materials are China sourced so you will need to fabricate your own repairs, but hey they are cheap to buy.

    ______________________________________________________________________________

    For all Chinese Attachments:

    Verify the voltage of the solenoids as many of them ship with 24 volt solenoids.  You must replace the solenoid coils with 12 volt rated ones for the attachments to work.  Here is a link to replacement coils.

    Click Here to Order a Replacement 12 Volt Coil

     

    ______________________________________________________________________________

    Wolverine Cement Mixer - This is a copy of an American designed and manufactured Star Industries Scoop and Mix.

    It uses one solenoid for control of the chute.  It does not come with the hose and it is metric so you will need to make a new chute if you want a hose or find a metric hose somewhere.  The primary pump action will cause the paddles to operate.  By pushing a control button, the solenoid will fire and allow the oil to travel through the chute hoses to the cylinder.  This will only happen if you push the button and operate the hydraulics at the same time.

  • Have blade ordered for 2013 bobcat T590 Don’t appear to have any wire if for the blade need assistance Please call 601-382-5223

    What kind of blade?  Pictures of the valve also helps.  Thanks

  • I have a grouser dozer blade with two wires and I'm trying to hook it up to my 2016 bobcat t650 but I can't get the functions on the joystick to work. The skid steer has a 7pin connector and the dozer blade has no connector.

    You will need a single channel controller like this to operate the valve on the dozer.

    CLICK HERE

  • I just bought this SG-CB-1000A-100. Hope it is the same as SG-CB-1000-100? What does the 1000A mean?

    New manufacturer, 24 hour burn in, larger package with a pigtail so it can be repaired. 2 Year warranty instead of one.  We are getting a lot better at making these and the finished product shows.

  • I think i have one of your units , it worked to Switch between a log grapple and the rotor , it had a red light and a green light when it was working , know the light is orange . not sure what is going on. Any help.

    Orange means it is blown.  Is the grapple Chinese?