SG-KIT-DT-8-F - 8 Pin Female Kit - Deutsch - Attachment Side | Skid Steer Genius
Fits old Cat, ASV and Terex. Includes 8 sockets & tool. You will need to solder or crimp wires to pins. These are the original OEM connectors used on all of the machines and not a poor quality knock-off. With decades of experience, you can count on us to supply you with everything needed in this kit. Others sell you just a part and you have to find and order the accessories just to make this connector work. We do it all for less.
- 1 Female Deutsch Body
- 1 Barrel Top Cap and Seal/Strain Relief
- 8 Female Sockets
- Installation Tool
- Detailed Instructions Tailored for Skid Steer Use
Kit does not include crimping tool or soldering tool to connect pins to wire or dust cap.
About these connectors:
Many years ago we had to buy these from the dealers for $120 each or with full harnesses for $350+. My background is in electronics and I have seen many connectors like this in the past. I knew they were not worth what they were charging. The problem was sourcing them. They are a German made connector and the part numbers used in the USA came up always taking us back to the dealers.
I traced them back in Germany and finally found an importer that would allow us to buy them if we bought enough. We took the risk because we used them on our attachments and we knew our customers would want them. Well, we were right. This is one of our top selling items based upon quantities sold.
We bring these in and kit them with everything you need to add to your harness. We are sure you will see just how much effort we put into this item just to save you money. These are the original German connectors used by all of the major manufacturers. We also offer real live support 24/7 so if you have an issue and need advice, we are there.
We Also Recommend
SG-CB-2000X-100 - 100 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-1000-100 - 100 Pack, 7 Pin Controller For Bobcat® Loaders - 1 Port | Skid Steer Genius
SG-CB-2000X-100 - 50 Pack - Genius - 7 Pin Controller For Bobcat® Loaders - 2 Port | Skid Steer Genius
SG-CB-4014 - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius
QUESTIONS & ANSWERSAsk a Question
A couple of weeks ago I called and asked about that one after for a John Deere 330 3G and was told to get the part number SGDTRDTP108 there is a two pin on both ends I need an eight pin adapter so do I also need to order this part number SG8DT8F? thanks
The main reason I don;t take phone calls is this. I have no idea what this is about or what the topic of the phone call would have been.
I have a 2011 caterpillar 242b3 skid loader.What adapter do i need? Then can it be wired to any snowblower?
I would need to know which brand of Snowblower you have. This is the connector for most but not Bobcat unless it is really old and uses a 14 pin.