Solenoid - Fits most major brand attachments | Skid Steer Genius
This is a replacement solenoid for most major manufacturers attachments. It has a Zener diode inside so it is not polarity sensitive like many of the OEM solenoids. Check with us if you are not sure about fit. If you are working on a Bobcat, Erskine or Quick Attach brand of attachment, the connector is not the same but you can cut the old wire off your solenoid and add a 2 Pin Deutsch Plug and you will instantly have it adapted.
We Also Recommend
QUESTIONS & ANSWERS
Ask a Question-
Will this work on my SG60? I thought the issue was in my wiring harness but I’m getting 12v to the end of the Delphi plug that goes to my “swing in” solenoid, it will swung out but sometimes won’t come back in. Until today i thought it was in the harness and I had repinned it to remedy because this is a random problem. But I finally had someone to help me toggle the switch and it is getting power when the harness is hooked to machine so it must be the solenoid. It has always given me problems
Just swap the solenoid from top to bottom. Does the issue move? Yes? Then it's the solenoid.