Cart 0

SG-CB-4014A - 50 Pack - Genius 7 Pin (4 Output) Controller For Bobcat® Loaders, Toolcat & Versahandler - 4 Port | Skid Steer Genius

  • $22,050.00

Ask a Question

QTY = 50 - Dealer/OEM Pack:  Buy 50 units at a time and save. SG-CB-4014A ARE NOW MADE TO ORDER IN 50 PACKS ONLY.  Ask about the lead time before you order.

2021 - New Year, New Look.  We have modified our most popular lines for 2021 for the following reasons:

Customers were continually tearing them apart by driving away with them connected to the attachment.  This would permanently destroy them, so we split the cabling and now the Deutsch connector will tear off of the cable.  You can then re-strip the cable, add pins, reassemble and get back to work.

Customers complained that they were too short.  The new design allows for a longer cable.

New Chinese attachments have no filtering on the solenoids.  This would cause a massive spark to be introduced into the line when in operation that would wipe out our earlier controllers.  The new PCB's have a wider component spacing and additional filtering to combat this effect.  We feel that this new design is the best of both worlds.  Our designs are now a decade old and we think we have finally covered every aspect of what can happen in the field to make this the most reliable controller to date.

This is a true Genius Controller designed for solenoid controls only.  Our customers spoke and we listened.  You asked us to create a 14 pin output connector style controller so you could plug 14 pin attachments directly to your Bobcat® machines without using a box control and we listened. 

Here it is.  The new 4014 controller.  It is a 4000 series, 4 output controller with a 14 pin connector pinned the old fashioned way.  Using the old Bobcat 14 pin layout which works with Takeuchi, Gehl, Kubota, Mustang, Case and Cat attachments up to 4 controls.

Perfect for CID/Spartan/Prowler Swing Boom Cutter.

This adapter is specially designed to plug into any Bobcat® 7 Pin connector and allow the operator to run up to 4 x 12 volt solenoids directly from the stick controls of your Bobcat®.  Works on Bobcat® skid steer loaders as well as Toolcat and Versahandler machines.  

Takes about 1 minute to install.  Is 100% plug and play.  This configuration is for boom mount so you can use it over and over on any attachment that has up to 4 solenoids to control.  This is complete and ready for plug and play directly into any Bobcat® branded machine.  It has power, communication, and a port status indicator LED to show you that it is working and that it is receiving commands from the Bobcat® machine.

Throw away the crappy controller that the manufacturers supply and switch over to true machine controls.

WARNING: CAT XHP High Flow Attachments into 14 pin plugs. There is a jumper installed in the attachment plug that loops pin K back to ground for high flow attachment sensing. This is only for CAT machines.  Bobcat uses pin K for power. This means that if you plug a Cat D series attachment into a Bobcat wired plug you will short the output and blow your fuse.

Read more about how this product functions here.  



This is not a Bobcat® product.  This product is not endorsed by Bobcat®.  We are in no way attempting to make you think this is a Bobcat® product. This product is optically isolated from the controls of your machine and can in no way damage your machine or controls.  It is perfectly safe to use and will not damage a thing.  If a dealer is attempting to tell you that your warranty will be voided if you use this product or that it will damage your machine, please call and report it to us.  Skid Steer Genius is a specialty controls company.  Our goal is to make anything you buy for your machine work on any machine.  Others design and build in such a way as to stop you from doing this.  

Bobcat®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries.
Bobcat Company is a subsidiary of Doosan Infracore Bobcat Holdings Co., Ltd., a wholly owned subsidiary of Doosan Infracore Co., Ltd.

All rights reserved.

We Also Recommend


Ask a Question
  • Wiring up an attachment and cant find the can bus controller output instructions from my 7 pin bobcat to 14 pin attachment controller

    All of our manucals can be downloaded from our web site here.

  • Can you tell me what dealers you have sold sg-cb- 4014a 50 packs to, so i can buy direct from them. Trying to go from 7pin bobcat t770 to a simex 40inch cold planer 14 pin 12 volt. Thanks for any info.

    A 4014 does not have enough controls. You need a 6014. CLICK HERE

    It shows sold out but a bunch are being loaded now so it will just be a couple of days.

  • I have a part number SG-CB-4014 but do not see an individual only 50pc bundle. Is it possible to order a few of the item. If so, could you please send me a cost and lead time.

    We only make them for bulk orders. I do have a few left over on my bench that were returns when people thought they were 6 channel. Let me know if you are interested.

  • I have a cb-4014 i think i made a mistake by removing the pins from the 14 pin plug to convert to a 7 pin trailer plug for my snow blower I have a skid pro blower is all lost or can you provide a color coding chart thank you and sorry for the blunder

    If you have the one that looks like a pipe bomb, you have destroyed it and it is now trash.  If you have the one with the box, then it can be repaired.  Skid Pro uses non commercial connections where we use the proper connections.  Why would you destroy the correct connector and opt for their trailer connector?

  • Do you have a plug for Kubota SVL95.2 that will connect directly to a topcat tree shear? Topcat is made by Argotk industries. I can send pictures if needed.

    TopCat is made by a company near Shanghai.  I have been there?  All of these names are just made up to make them viable to sell at RB Auctions. CLICK HERE FOR AN EXPLANATION

    We created kits for Chinese attachments. 

    Here is a link to what I think will work.


  • I have a 595t bobcat with 7 pin on machine and have an attachment with 14 pin will the SG-CB 4014 work and what does it cost

    4014's are no longer made except 50 at a time for OEM's.  6014 is what you would use.

  • Can we purchase just 1x SG-CB-4014?

    These are no longer manufacturerd.  The new part number is the 6014.  Thanks

  • I have a 2019 Bobcat toolcat and a erskine snow blower. 7 pin and 14 pin. Will this work. Can I buy 1 and how long will it take to get it

    This item is no ponger produced.  Please purchase this.