Cart 0

Chinese Auction 14 Pin Control Kit - Dual Control

  • $395.00

Ask a Question

Use this kit on 14 Pin machines like Kubota, New Holland, Cat D Series, John Deere, Gehl, Etc.  Includes 2 x Din connection harnesses.

These are attachments generally sold through RB Auctions or on eBay.

Current Names Being Used that this kit is designed to fit.  They add names as soon as people realize they are not real.  There are no companies in the USA or parts.

Land Honor, Wolverine, Handy, Kit Containers (HAHA), All Star, Agrotk, TMG, Landy, Great Bear, Suihe, Great American Attachments, etc.,,etc.

It is your responsibility to verify that this will work because they constantly change the design to use whatever parts they have on hand.  If you are not sure, send us photos of the attachment, solenoid control block and all connections including any kind of controller that they shipped.  Most times we can help but sometimes we have to deliver the bad news and you will be on your own.

All of these attachments are notorious for not working out of the box or for falling apart after only a few hours.  If your attachment does not work, we will troubleshoot our connection only to prove that it is working.  The rest is on you to figure out.

This could mean that you need to change solenoids from 24 volt to 12 volt, bleed air out of the system, change couplers and move hoses around or even make replacement parts or modify the mounts to fit your machine.  

One thing that you should do is to replace all of their crappy hardware with grade 8 and use blue Loctite to ensure that nothing falls apart at the first use.  This is especially important for any kind of mower.  I have had people comment about losing their blades immediately but it's ok because they saved thousands over an American brand.  What they do not realize is that there are no parts available in this country because the brand names are just made up.

We Also Recommend


Ask a Question
  • Have a 2013 Case SV300 with the 14 pin hook up. I have fours electrical rocker switches: one that looks like off/on, the other three have a picture of a hydraulic cylinder. I have two attachments I would like to operate: Edge snow blower with electric rotation and electric chute angle. Both are two wire electric actuators that change direction when you reverse polarity to them. The second attachment is an Landhonor grade blade with 6 solenoids set up in opposing pairs. Can you tell me which harness(s) I will need? Thanks, Alan

    The Blower will require a harness and flip flop control box.



    The graders are different every time because there is no quality control in China.  This is usually the harness to use.


    But you may require adapters if they are using DIN connections.


    And you may need to change out the solenoids if they say 24 volt.